OK, Mega thread so this will be updated
############Table Of Content #########
1: IPhone 6 (Stable)
2: Galaxy s7 (Stable)
3: IPhone 7 (BETA & unstable)
4: ??
5: ??
6: ??
7: ??
8: ??
##############Tutorials Below########
1. Jailbreak for IPhone 6 (latest)
Supported firmware versions: iOS 9.0, 9.0.1, 9.0.2.
Supported iOS devices: iPhone 6s/6s Plus/6/6 Plus/5s/5c/5/4s, iPad 4/3/2, iPad mini 4/3/2/1, iPad Air 2/1 and iPod touch 5/6.
Pre-requisites:
How to jailbreak iOS 9.0.2:
Step 1: First up, turn off Find My iPhone on your iPhone, iPad or iPod touch. Simply navigate to Settings > iCloud > Find My iPhone and turn off ‘Find My iPhone’.
Step 2: Turn off Passcode and Touch ID unlock. To do this, simply navigate to Settings > Touch ID & Passcode and then tap on ‘Turn Passcode Off’.
Step 3: Switch on Airplane Mode from Settings.
Step 4: Download Pangu 9 for Windows from here: Download Pangu 9 iOS 9 – 9.0.2 Jailbreak For iPhone 6s, Plus, 6, 5s, iPad And More.
Step 5: Connect your device to your computer and launch Pangu 9.
Step 6: Now click on Start button in the center for the jailbreak to begin.
Step 7: You will now get another window, tap on ‘Already backup’ to continue.
Step 8: During the jailbreak process, you will notice two apps appear on the Home screen, one named Pangu and another named WWDC. Your device will automatically reboot after which the tool will ask you to unlock your device and turn on Airplane Mode again.
Step 9: Once you turn on the Airplane Mode again, you will notice the tool will continue the jailbreaking process.
Step 10: After a short while, it will ask you to run the Pangu app from the Home screen. Do it and give access to Photos app when prompted to.
Step 11: After a short while, the jailbreak will complete and you will get the message “Jailbreak completed” on the tool. You can now safely close the Pangu app on Windows. Your device will now restart after which you will find Cydia on the Home screen.
That’s it. Jailbreak is done.
2) Galaxy s7 Root (latest)
Warning! Since the time of writing this and doing the video, there has been updates to some of the GS7 and GS7 Edge firmwares. The software linked to here will not work for devices on newer firmware and you have to wait for the developer of the rooting firmwares to update them first. Do not attempt this unless you know you have the right rooting firmware for your device (you can find out from this link and also ask the developer directly for more info – XDA GS7 Root).
Begin
Drivers
Now, Your phone is rooted.
3) IPhone 7 'Jailbreak' (BETA and Unstable)
This isn't the best until a new one is released but if u really want it.
Backup data
That's it for now!
Enjoy
##############Sources#############
1) How To Jailbreak iOS 9.0.2 On Any iPhone, iPad, iPod touch Using Pangu 9 [Tutorial] | Redmond Pie
2) How to Root the Samsung Galaxy S7 or S7 Edge (All Snapdragon Versions) (Video)
3) iOS 10.1 Jailbreak / iOS 10.1.1 Jailbrek
############Table Of Content #########
1: IPhone 6 (Stable)
2: Galaxy s7 (Stable)
3: IPhone 7 (BETA & unstable)
4: ??
5: ??
6: ??
7: ??
8: ??
##############Tutorials Below########
1. Jailbreak for IPhone 6 (latest)
Supported firmware versions: iOS 9.0, 9.0.1, 9.0.2.
Supported iOS devices: iPhone 6s/6s Plus/6/6 Plus/5s/5c/5/4s, iPad 4/3/2, iPad mini 4/3/2/1, iPad Air 2/1 and iPod touch 5/6.
Pre-requisites:
- Backup all of your data to either iTunes or iCloud.
- If you have upgraded to any version of iOS 9 from an OTA (Over-The-Air) update system, make sure you first restore to a fresh version of iOS 9.0.2 from iTunes. Not doing this will likely result in jailbreak failing on your device. You can get iOS 9.0.2 from here: Download iOS 9.0.2 Links For iPhone, iPad, iPod touch [IPSW].
- Access to Windows as Pangu 9 is currently available for Windows only.
- Latest version of iTunes installed.
How to jailbreak iOS 9.0.2:
Step 1: First up, turn off Find My iPhone on your iPhone, iPad or iPod touch. Simply navigate to Settings > iCloud > Find My iPhone and turn off ‘Find My iPhone’.
Step 2: Turn off Passcode and Touch ID unlock. To do this, simply navigate to Settings > Touch ID & Passcode and then tap on ‘Turn Passcode Off’.
Step 3: Switch on Airplane Mode from Settings.
Step 4: Download Pangu 9 for Windows from here: Download Pangu 9 iOS 9 – 9.0.2 Jailbreak For iPhone 6s, Plus, 6, 5s, iPad And More.
Step 5: Connect your device to your computer and launch Pangu 9.
Step 6: Now click on Start button in the center for the jailbreak to begin.
Step 7: You will now get another window, tap on ‘Already backup’ to continue.
Step 8: During the jailbreak process, you will notice two apps appear on the Home screen, one named Pangu and another named WWDC. Your device will automatically reboot after which the tool will ask you to unlock your device and turn on Airplane Mode again.
Step 9: Once you turn on the Airplane Mode again, you will notice the tool will continue the jailbreaking process.
Step 10: After a short while, it will ask you to run the Pangu app from the Home screen. Do it and give access to Photos app when prompted to.
Step 11: After a short while, the jailbreak will complete and you will get the message “Jailbreak completed” on the tool. You can now safely close the Pangu app on Windows. Your device will now restart after which you will find Cydia on the Home screen.
That’s it. Jailbreak is done.
2) Galaxy s7 Root (latest)
Warning! Since the time of writing this and doing the video, there has been updates to some of the GS7 and GS7 Edge firmwares. The software linked to here will not work for devices on newer firmware and you have to wait for the developer of the rooting firmwares to update them first. Do not attempt this unless you know you have the right rooting firmware for your device (you can find out from this link and also ask the developer directly for more info – XDA GS7 Root).
Begin
- This will erase your phone so be sure to backup anything you need.
- You need a Windows computer to do this.
- This will give you root access but will not allow you to flash custom ROMs or a recovery. Do not attempt to flash a custom recovery or you could hurt the phone.
- You can however use some cool tweaks and Xposed to customize the phone instead.
- Make sure that secure boot in Settings > Lock Screen is disabled.
Drivers
- Download and install the Samsung drivers here.
- Head to Settings > About Phone and tap on build number until it tells you you are a developer.
- Tap Back and tap on Developer Options and enable USB Debugging.
- Plug the phone in via USB and head to my how to setup ADB tutorial and install adb from there (takes about 30 secs to do, don’t worry). Once done, return to this tutorial.
- Download Odin and save it to your desktop.
- Download the rooted boot image for your device below and save it to your desktop (it is a .tar file, do not extract it, keep it as a .tar):
All Galaxy S7 Versions
All Galaxy S7 Edge Versions
- Extract and open Odin.
- Turn off the phone and turn it back on by holding down Volume Down, Home and Power at the same time until we get to Download mode.
- Click on AP and select the .tar file for your phone you just downloaded.
- Click Start and wait for the device to flash and reboot.
- Download the SuperSU installer and save it to your desktop.
- Extract it after it downloads.
- With the phone still plugged in, double-click the root.bat file and wait for it to flash the phone.
- When that’s done, open SuperSU on the phone and make sure to IGNORE it asking you to update the binaries. The developer of SuperSU has said this might hurt the phone so just don’t update it. Ever.
Now, Your phone is rooted.
3) IPhone 7 'Jailbreak' (BETA and Unstable)
This isn't the best until a new one is released but if u really want it.
Backup data
- Step 1 : As the first step you can bookmark this page to visit back from your iPhone, iPad or iPod.
- Step 2 : Make sure that your device is running on iOS 10.1. In order to check the iOS version of your device, go to Settings > General > About and check the Version of the device.
- Step 3 : Launch Safari browser of your device.
- Step 4 : Find the bookmarked page or type iOS 10.1 Jailbreak / iOS 10.1.1 Jailbreak (Make sure that you use the Safari browser of your device)
- Step 5 : Tap on “iOS 10.1.x Jailbreak” button
- Step 6 : Wait for TaiG9 to connect to Pre Jailbreak Servers
- Step 7 : When asked tap “Continue Process” button
- Step 8 : Wait for the TaiG9 Process to download data to jailbreak your iOS 10.1 running iPhone, iPad or iPod.
- Step 9 : When the process completes downloading data, It will ask your permission to penetrate. Tap on “Penetrate Now”. Before starting the penetration process it will display you a message with “Jailbreak Process will be started, Please hang while we complete the process”. Tap OK to start the penetration process.
- Step 10 : Wait for the penetration process. The penetration process for iOS 10.1 may take up to 5 minutes. It depends on the device and the connection speed.
- Step 11 : Once the device penetrated, the popup will come to Install iOS 10.1 Jailbreak App. Install the app and enjoy iOS 10.1 Jailbreak(Pre)
That's it for now!
Enjoy
##############Sources#############
1) How To Jailbreak iOS 9.0.2 On Any iPhone, iPad, iPod touch Using Pangu 9 [Tutorial] | Redmond Pie
2) How to Root the Samsung Galaxy S7 or S7 Edge (All Snapdragon Versions) (Video)
3) iOS 10.1 Jailbreak / iOS 10.1.1 Jailbrek